header spacer
line spacer


blinddistributors@gmail.com
4085 North Rancho Dr.
Las Vegas, Nevada 89130
Phone: 702-683-6335


line spacer
ALL PRODUCTS
Shop Blinds
Wood Blinds
Faux Wood Blinds
Vertical Blinds
Aluminum Blinds
Commercial Blinds
Horizontal Vinyl Blinds
1" and 2" Metal Blinds
1" and 2" Vinyl Blinds
Other Products
Cellular Shades
Sheer Shades
Bamboo Shades
Roller Shades
Cellular Verticals
Bamboo Sliding Panels
Window Shadings
Plantation Shutters
Services
Parts to Repair Blinds
Service Las Vegas Only
Professional Measuring
Installation Guides
Local Blind Repairs
Local Shutter Repairs
Testimonials

window blinds testimonial customer

Thousands of
Happy Customers


"The blinds were delivered this morning and my husband has already installed them, the instructions made it simple. They look amazing and we are very pleased with the quality."












line spacer
How To Install Your New Wood Blinds
Congratulations on your purchase of a quality blind. Your blind has been custom made to your specifications and is one of the finest window treatments available. Before you unwrap your blinds, please take a few moments to read these instructions. With careful installation and periodic cleaning your blind will provide you with many years of trouble free service.



Your wood blind includes the following:
  • two installation brackets
  • mounting screws
  • a wand
  • a valance
  • auxiliary support brackets if your blind requires them (48 1/8") or wider
  • optional hold-down brackets are included if you ordered them


To install your blind you will need the following tools:
  • pencil
  • medium size screwdriver
  • drill
  • 7/64 drill bit. or a hammer and finishing nail
  • scissors
  • level (optional)
  • 1/16 drill bit


Installation instructions
Unwrap the blindDo not untie its cord at this time. Hold the blind against the window to determine proper placement. it will either fit inside the window casing (inside mount) or outside the window casing or wall (outside mount). This will determine where and how your installation brackets should be attached. Note that the brackets are marked R.H.(right hand) and L.H.(left hand).




If your blind is to be installed as an outside mount. Hold the blind level and center against the window casing. Mark the casing with a pencil just below the headrail on each end. Also mark the window casing 1/8" beyond the the end of the headrail. The right and left installation brackets will be placed on these marks.


For an inside mount,make certain the headrail is level and clear of obstructions. Make pencil marks below the headrail on each end. The right hand and left hand installation brackets will be placed on these marks.


For a ceiling or overhead mount, hold the blind against the ceiling centered in front of the window and make pencil marks 1/8" beyond the end of the headrail. The right and left installation brackets will be placed on these marks.


Mounting Installation Brackets
The brackets may be mounted using two screws in several different orientations depending upon your needs:
  1. Inside the jambs (inside mount).
  2. To the outside face of the window casing or wall (outside mount)
  3. Overhead: either to the top inside of the window frame (inside mount) or to the ceiling (outside mount).

Hint: Smearing a little bar soap on the screw threads will make them drive more easily.

Open the bracket's swivel cover with a screwdriver. Hold the bracket against the mounting surface and align it with the pencil marks. Using a pencil, mark the location of two diagonal holes for the mounting screws. you may drill holes for the screws using a 7/64" drill bit, or if a drill is not available use a finishing nail and a hammer or an awl to make small holes to start the screws. Keep the screws at least 1/4" form the edge of the wood to prevent it from splitting.



If the mounting surface is metal, you must pre-drill holes for the screws, using a 1/8" steel drill bit.

If the surface is brick, tile, stone or concrete it will be necessary to use a carbide drill bit and suitable anchors, plugs or screws.

Plaster and wallboard (drywall) need pre-drilled holes for anchors or plugs. Follow manufacturer's recommendations for these types of fasteners.



Auxiliary Support Brackets
If an auxiliary support bracket is included with your blind it should be placed in line with the installation brackets.

The auxiliary support should not be in line vertically with the blind's cord or ladder as it may interfere with the blind's lifting and tilting mechanism.

Headrail Installation
Insert the headrail into the mounting brackets. If an auxiliary support bracket is used. be sure that it is properly engaged with the headrail.

Close the swivel covers to lock the headrail in place.

If your blind is not sitting snugly left to right: open the mounting brackets, remove the headrail and pry out the two tabs at the end of the headrail a bit with a screwdriver.


Wand Attachment
Attach the wand to the hook and slide the sleeve down to trap the wand in place.

Now you will be able to adjust the angle of the slats by turning the wand. CAUTION: Do not continue to turn the wand after it starts to bind as this may damage the tilt mechanism.

Valance Installation
If your blind was ordered as an outside mount, the valance is supplied with pre-mounted returns. No returns are included with an inside mount.


Attach valance clips to the back of the valance. Position the valance on the headrail and snap it into place.

The valance may be detached and re-installed as required.

Adjusting Blind Height
To raise or lower your blind, pull the cords downward and towards the center of the blind. Raise or lower the blind to the desired height.

Now pull the cords back past the end of the blind and release them they will lock automatically.

Optional Hold Down Brackets
If you ordered optional hold down brackets to keep the bottomrail stationary, follow these instructions.

Fully extend the blind. Insert the bracket in holes as shown in a. and b. Mark the hole location where the screws are to be inserted. Try to keep the holes at leased 1/4" from the edge of the wood to avoid splitting. You may use a 1/16" drill bit or if no drill is available, use a finishing nail and a hammer to make small holes to start the screws. (a little soap on the screw threads may help prevent splitting the wood)


Cleaning
Your blind is easily cleaned by extending it to its full length and closing the louvers (not tightly) first in one direction and then the other. Wipe the with a soft cloth or clean them with your vacum cleaner's brush attachment.

Care for these blinds as you do other wood furnishings. DO NOT USE WATER OR ABRASIVE CLEANERS.

These Blinds are made of fine, natural woods, carefully finished, irregularities which may appear form slat to slat are characteristic of genuine wood and contribute to its beauty.


SHOP WINDOW BLINDS
real wooden blinds
fauxwood blinds
aluminum mini blinds
pvc vertical blinds
cellular window shades
honeycomb/cellular
bamboo blinds/woven shades
roller window shades
sun shades / solar shades
sheer shadings
BLINDS RESOURCES
how to measure windows
how to install window coverings
how to clean window blinds
privacy policy
company info
faq's
window blinds information
Site Map
SHOP BY FEATURE
child safety cordless lift
top down/bottom up
blackout shades

SHOP BY NEED
sliding glass door blinds
discount blinds
cordless window shades
CUSTOMER SERVICE
customer care
my blinds shopping cart



PAYMENT OPTIONS credit cards accepted at Blind Distributors.com

Credit Card Processing
Copyright © 1998-2016 Blinddistributors.com
All content © Blinddistributors.com